SNI certification for household electronic products
Through PERMENPERIN No. 7 year 2025, the Ministry of Industry has set the implementation of SNI mandatory for household electronic products. The regulation was made to protect consumers and domestic producers against low-quality imported products. It comes into effect six months after promulgation; promulgated on 24 January 2025, it is enforced from 24 July 2025. In this article, we look closely at the new SNI mandatory regulation for household electronic products.
Scope of SNI mandatory for household electronic products
Ministerial regulation number 7 names several types of household electronic products that require SNI certification. It defines household electronics as household electronic products rated at no more than 250V AC single phase, or powered by DC supply.
According to this regulation, SNI certification for household electronic products covers domestic and imported products alike, as long as they are marketed in Indonesia. Refer to the table below for the full list of SNI mandatory household electronic products.
| Type of household electronic product | Description | HS code |
| Air conditioner (AC) | A split AC including multisplit, window and/or portable with a cooling capacity of up to 3 PK (27000 BTU/h or 7913 Watt) and a rated electrical voltage of no more than 250 V | 8415.10.20 |
| Washing machine | Either one tube (single tube) or two tubes (double tube) with a dry linen capacity of no more than 16 kilograms with an electrical voltage of no more than 250 V | 8450.11.10; 8450.11.90; 8450.12.10; 8450.12.90; 8450.19.11; 8450.19.19; 8450.20.00 |
| Refrigerator | With a gross volume of no more than 400 liters and an electrical voltage of no more than 250 V, including upright showcases | 8418.10.31; 8418.10.32; 8418.21.10; 8418.21.90; 8418.29.00; 8418.30.10; 8418.30.90; 8418.40.10; 8418.40.90; 8418.10.91; 8418.10.99; 8418.50.19; 8418.50.99 |
| Water pump | The liquid temperature does not exceed 90°C for household and similar purposes using an electrical voltage of no more than 250 V for single phase with an output electrical power of no more than 1000 watts, including vertical pumps and booster pumps | 8413.70.42; 8413.70.91; 8413.81.13 |
| Submersible water pump | For household and similar purposes with an electrical voltage of no more than 250 volts for single phase with an input electrical power of no more than 1500 watts or a maximum pipe size of 1.5 inches | 8413.70.31 |
| Electric and steam iron | For household use with an electrical voltage of no more than 250 V using electrical power of no more than 1000 watts | 8516.40.90 |
| Electric blender, electric juicer, electric mixer, chopper, and food processor | – | 8509.40.00 |
| Rice cooker | With a volume of up to 3 (three) liters or input power of up to 1000 watts | 8516.60.10 |
| Electric kettle | With a rated capacity not exceeding 10 (ten) liters | 8516.79.10; 8516.79.90 |
| Immersion water heater | – | 8516.10.30 |
| Water dispenser | Only equipped with water heating system, and equipped with water heating and cooling system | 8516.10.11; 8516.10.19; 8421.21.11 |
SNI conformity assessment

Household electronic products follow SNI mandatory through conformity assessment under certification system type 5. Type 5 conformity assessment has two main stages:
- Factory audit: in type 5 certification, the production site is audited, together with how the quality management system is implemented according to ISO 9001:2015.
- Sample testing: type 5 certification also requires samples to pass quality conformity testing against the applicable SNI testing standards.
The Ministry of Industry appoints the LSPro and testing laboratory that carry out the factory audit and sample testing. Once the conformity assessment is finished, its result is issued as an SNI Certificate.
SNI certificate holders
As for who can hold an SNI certificate, the new regulation changes very little. Only these parties can own SNI certificates:
- Local manufacturer companies
- Foreign manufacturers
An SNI certificate is issued to one local manufacturer company or one foreign manufacturer, for a single production site. The new regulation allows certificate holders to list more than one brand on one SNI certificate, and the certificate is valid for five years from its issuance date.
SNI certificate under local manufacturer companies
For a local manufacturer company, the main requirements to hold an SNI certificate for SNI mandatory household electronic products are:
- A business license in industry, with a scope covering KBLI 27510, 27520, 28130, and/or 28193.
- Local manufacturer companies have their own brand for household electronics class 7, class 8 , class 9, and/or class 11 issued by the Directorate General of Intellectual Property.
- Produce household electronic products with the lowest protection class of class I, and the lowest class II for handheld kitchen equipment products.
- Local manufacturers have implemented the ISO 9001:2015 quality management system.
- Have production facilities and testing equipment.
- Local manufacturer companies must have a SIINas account.
SNI certificate under foreign manufacturers
For a foreign manufacturer company, these are the main requirements if it wants SNI certificates for SNI mandatory household electronic products:
- Conducting business activities in household electronics industry.
- Foreign manufacturers have their own brand for household electronics class 7, class 8 , class 9, and/or class 11 issued by the Directorate General of Intellectual Property.
- Have an official representative appointed by the foreign manufacturer, one foreign manufacturers can only appoint one official representative.
- Official representative only represents one foreign manufacturer, or local representative can represent more than one foreign manufacturer if they are under the same parent company.
- Official representatives obtain licenses agreement for household electronics brands of class 7, class 8, class 9, and/or class 11 from foreign manufacturers.
- Official representatives control warehouses in the same city or district.
- Official representatives can act as importers for household electronic products produced by foreign manufacturers.
- Importers can be appointed by more than one official representative.
- Foreign manufacturers have production facilities and testing equipment.
- Official representatives must have a SIINas account.
SNI certification process for foreign manufacturers
Before starting the factory audit and sample testing process, official representatives must conduct registartion activities firs on their SIINas account, including:
- Inputting data by filling out the form.
- Selecting the SNI to be submitted for conformity assessment.
- Selecting the LSPro that will conduct the conformity assessment.
- Uploading brand certificate for household electronics products class 7, class 8, class 9, and/or class 11 issued by the Directorate General of Intellectual Property.
- Uploading other supporting documents in the form of:
- Application letter printed through SIINas and signed by the director of the official representative.
- Copy of the deed of establishment of the foreign manufacturer and its amendments.
- A copy of the business license whose scope of business activities covers the household electronics industry.
- Certificate of ISO 9001:2015 quality management system.
- Statement letter printed through SIINas and signed by the director of official representative.
- Production process flow diagram.
- Information on household electronics including product type, brand, and type/model.
- List of product groups.
- List of critical components.
- Certificate or test results for critical components according to IEC standards or equivalent standards.
- List of production facilities and testing equipment.
- List of product quality control from raw materials to final products.
- List of documented information according to ISO 9001:2015.
- Organizational structure.
- Business process.
- SNI certificate for cords and plugs if there are cords and plugs in household electronics.
- Illustration of the affixing of the SNI mark.
Maclon case for SNI household electronic products
Based on the new regulation, there is a new rule when foreign manufacturer uses maclon factory. If foreign manufacturer as brand owner uses maclon factories to produce their household electronic products, then SNI certificate can only be processed if maclon factories have their own brand and must be registered in Directorate General of Intellectual Property. So, maclon factories must have their own existing SNI certificate for their own brand.
SNI certification cannot be processed when a foreign brand owner wants to certify household electronic products made by maclon factories without an SNI certificate, since this goes against the regulation.
Got a question about SNI certification for household electronic products? Simply send your enquiry through our contact form.




2 thoughts on “SNI certification for household electronic products”
we need to apply sni for kabel optik, mohon bantu
Tim kami akan kontak alamat email yang tersedia segera ya Bapak/Ibu