Skip to content

Brazil ANATEL Certification for Telecommunications Devices

Brazil’s current regulations oblige many types of telecommunications and ICT devices to have type approval certificates before they are brought into and marketed in Brazil. For manufacturers, understanding this certification process is essential.

The Agência Nacional de Telecomunicações or ANATEL is a Brazilian national agency responsible for regulating and managing the certification procedures for telecommunications and ICT devices in Brazil. Therefore, the type approval certification for Brazil is also known as ANATEL certification.

In this article we will discuss all about Brazil ANATEL certification for telecommunications and ICT devices before being marketed in Brazil.

Type Approval Certification in Brazil

Type Approval Certification in Brazil

Before manufacturers importing their telecommunications devices to Brazil, they need to prepare type approval certification first. In Brazil, the type approval certification for telecommunications and ICT devices is managed by the Agência Nacional de Telecomunicações (ANATEL).

ANATEL is a national telecommunications agency that responsible for regulating technical standards and managing spectrum allocation in Brazil, including issue the type approval certificates for telecommunications products. Therefore, type approval certification for telecommunications and ICT devices in Brazil is also known as ANATEL certification.

Basically, the ANATEL certification process will require a two-step type approval: conformity certification and homologation. The conformity certification process is managed by Designated Certification Body or Organismo de Certificação Designado (OCD) authorized by ANATEL. After obtaining the Certificate of Conformity from OCD, the product must be registered with ANATEL for legal status or homologation process.

Before processing the ANATEL certification, manufacturers may need to understand the type of product subject to ANATEL certification based on ANATEL Act No.7280. The type of product will determine the conformity assessment method and conformity assessment model to be applied to the product.

Requirements of ANATEL Certification

Most of the time the ANATEL certification requires two main steps: local testing and homologation. Local testing is required when processing telecommunications equipment under the “Certification” as the conformity assessment method. However, for telecommunications equipment under “Declaration of Conformity”, the paperwork process may sufficient.

Before performing the local testing, manufacturers first need to contact the Designated Certification Body (OCD) for coordination on the documents review and defines required testing for the products. Here is list of the required documents for ANATEL certification under local testing method:

  1. Product technical documentation
  2. Test reports
  3. User manual in Portuguese
  4. Labels
  5. Declaration of conformity
  6. Power supply information
  7. Internal and external photos
  8. Schematics diagrams
  9. Valid ISO 9001 certificate of the manufacturing site in Portuguese

Applicants of ANATEL Certification

For ANATEL certification, the applicants must be a Brazilian-registered entity with valid CNPJ who also act as local entity that responsible for the telecommunications product in Brazil. Therefore, foreign manufacturers cannot apply for ANATEL certification directly, they must appoint local registered companies in Brazil. The local companies could be a local manufacturer, local importer, authorized distributor or a legal representative in Brazil.

Lead Time of ANATEL Certification

Since the ANATEL certification involves several stages during its type approval process, the lead time is relatively longer compared to other countries, around 8-12 weeks. However, the estimated lead time may vary depending on product complexity and the availability of testing laboratories in Brazil.

In general, the process for ANATEL type approval will be carried out under four different entities with different responsibilities in each stage, as follows:

Entity NameType Approval Activity
Manufacturer1). Provides the technical information of the product.
2). Selects the Designated Certification Body (OCD).
3). Chooses the testing laboratories.
4). Submits additional requirement documents to ANATEL.
Designated Certification Body (OCD)1). Reviews the technical information of the product supplied by manufacturer.
2). Determines the applicable test requirements of the product.
3). Reviews the test reports issued by testing laboratories.
4). Issues the Certificate of Conformity and submit to ANATEL.
Testing Laboratory1). Performs product testing in accordance with applicable regulations determined by OCD.
2). Issues test reports for OCD review.
ANATEL1). Reviews documents submitted by manufacturer and OCD.
2). Issues Certificate of Homologation for the product.

Label Requirements of ANATEL Certification

After a telecommunication product obtain ANATEL homologation certificate, it is mandatory for manufacturers to affix a compliance mark set by ANATEL. For Brazil type approval, the compliance mark must be affixed with the ANATEL expression format followed by the homologation code with format HHHHH-AA-FFFFF, where:

Label Requirements of ANATEL Certification
  • HHHHH: Homologation number
  • AA: Year of issuance of the homologation certificate
  • FFFFF: Code of manufacturer of the product

Manufacturers can verify the homologation code on the ANATEL homologation certificate, the homologation code must be assigned by ANATEL. Alternatively, electronic identification (e-label) or QR code identification may be used.

Validity of ANATEL Certificates

The validity period of Brazil homologation certificate may vary depends on the type of product. The product type must be determined according to ANATEL Act No.7280 for reference list of products for telecommunications in Brazil. There are two types of telecommunications products regulated under ANATEL Act No. 7280.

Products intended for general public use require certification based on type testing with periodic evaluation of the product and factory management system every two (2) years. And for infrastructure and professional-use products, certification based on type testing with periodic evaluation of the product and factory management system every three (3) years.

Example of ANATEL Certificates

ANATEL certificates contain several details about the telecommunication devices and the applicant. The example below shows what an issued ANATEL certificate looks like.

Conclusion

Brazil type approval comes with many requirements that should be understood before starting. Manufacturers frequently struggle with Brazil ANATEL certification because of limited knowledge and language barriers in the Brazilian type approval process.

Partnering with a type approval service provider helps manufacturers avoid these problems. For further help with Brazil ANATEL certification, send a message to our expert team through our contact form.

Tags: