Applicable Standards for WLAN Devices in Indonesia
WLAN Approval test will be based on Natioanl standards: KEPDIRJEN No.058/DIRJEN/1998 (indoor application), KEPDIRJEN No. 268/DIRJEN/2001 (outdoor application) and PERDIRJEN No. 233/DIRJEN/2010. Most of standards are mainly adopted from IEEE 802.11a/b/g/n. The key parameters as follows:
- Access Control Protocol Method: TDMA/FDMA/CDMA/CSMA-CA
- Modulation type: FSK/BPSK/QPSK/QAM/CCK
- Multiplexing technique: OFDM/TDM/FDM
- Spread spectrum: FHSS/DSSS
- CNR for 1X10¯ 6 symbol error rate: ≤ 10 dB
- Spurious all band: ≤ -50 dBc
- Receiver sensitivity: ≤-58 dBm
- Radiated Emission Limit: 500 µV/m at 3 meters measurement (FCC part 15.209)
- Operating Frequencues: 2.4 – 2.4835 GHz and 5.725 – 5.825 GHz
- Maximum bandwidth: 20 MHz
- EIRP (2.4 – 2.4835 GHz): 27 dBm for indoor utilization and 36 dBm for outdoor utilization (KM No.2/2005)
- EIRP (5.725 – 5.825 GHz): 36 dBm for PtoP and PtoMP application and 33 dBm for mesh application (PERMEN No.27/2009)
- Minimum data access: DSSS shall be 11 Mbps / channel and FHSS shall be 3 Mbps / channel
- Interface: IEEE 802.3 compliant (Ethernet/E1)
Document Requirements
- Power of Attorney to us
- Completed Application Forms [ PM.4 and PM.5]
- Technical Data of Device [ General information, Installation Guide, User Manual, Foreign Test Report (optional), etc..]
- More detail please contact us
