Skip to content

RFID Approval Test

Applicable Standards in Indonesia 

RFID approval test will be based on national standard: KEPDIRJEN No.214/DIRJEN/2005 for RFID operation in 13.56 MHz, with the key parameters are as follows:

  • Radiated Emission Limits

Frequency (MHz)

Field Strength (µV/m)

Measuring Distance (m)

13.567 – 30.0

65

10

  • Error Frequency shall be below 50 KHz
  • The Transmission power shall be below 10mW (ERP)

Another kind of RFID approval test will be based on national standard: KEPDIRJEN No.221/DIRJEN/2007 for RFID Operated in 923 – 925 MHz, with the key parameters as follows:

  • Radiated Emission Limits

Frequency (MHZ)

Field Strength (µV/m)

Measuring Distance (m)

923-925

500

1

  • Tag utilized shall be passive tags
  • Total bandwidth utilization shall be 2 MHz with maximum hopping channel 500 KHz
  • The transmission power shall be below 2000mW (ERP)
  • Modulation technique: Frequency Hopping Spread Spectrum (FHSS)
  • Transmitter antenna shall be embedded with +/- 6 dBi, 5Ω
  • Error Frequency: +/-20 ppm from center frequency
  • Communication ports:UART, RS-232,RS-485, USB, Serial, Parallel, LAN, WLAN, WAN
  • Receiver Sensitivity: max 28dBµV/m or -96dBm, with impedance input 50Ω

Document Requirements

  1. Power of Attorney to DIMULTI.CV
  2. Completed Application Forms [ PM.4 and PM.5]
  3. Technical Data of Device [ General information, Installation Guide, User Manual, Foreign Test Report (optional), etc..]
  4. More detail please contact us

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.